RAMPAS PARA TALLER
ALINEADORAS AUTOMOTRICES
BALANCEADORAS DE LLANTAS
DESMONTADORAS DE NEUMÁTICOS
GENERADOR DE NITRÓGENO
PRENSAS HIDRÁULICAS
TORNOS
AIRE ACONDICIONADO
SISTEMA DE ENFRIAMIENTO
OPRESOR DE RESORTE
PINTURA
CABINAS DE PINTURA AUTOMOTRIZ
 • AMBER
 • CORAL

 

Pintura Automotriz

Cabinas de Pintura Automotriz

Amber

The spray booth/oven mod. Amber is the smallest unit of all Cometi product range as it has a fixed useful width narrower than the other booths and can be configured in 3 different lengths and heights. This booth comes with a front frame with 2 doors for simple paint jobs but it can also be supplied with 3 doors as regular booths for car body refinishing.

The booth mod. Amber is supplied with a useful width of 3720 mm. The length can be of 5900 mm, 6490 or 7080 mm of useful space. The standard height is 2600 mm but on demand it can also be supplied with a height of 2800 mm or 3000 mm.

Desmontadora de ruedas para vehículos industriales GTB 16

Technical specifications of models AMBER:

AMBER 60 AMBER 65 AMBER 70
mm 5900 6490 7080
mm 3720 3720 3720
mm 2600
2800
3000
2600
2800
3000
2600
2800
3000
Watt 1200
1800
2400
1200
1800
2400
1440
2160
2880
m3/h 18.000 18.000
20.000
22.000
m/sec 0,23 0,21
0,23
0,23
KW 5,5 5,5
7,5
7,5
Kcal/h 140.000 140.000
160.000
160.000

PDF
Docs

Amber 60-18
Amber 65-18
Amber 65-20
Amber 70-22
Characteristics in detail:

Il layout The layout will be studied according to the needs and the available spaces of the customer.
 
Dimensions Width: the spray booth mod. Amber has a useful fixed width of 3720 mm
Height: the spray booth mod. Amber has a useful standard height of 2600 mm, but on demand it can be supplied with useful height of 2800 or 3000 mm
Length: the spray booth mod. Amber can be supplied in three useful lengths which are 5900 mm, 6490 mm, or 7080 mm
 
Overall dimensions The overall dimensions change according to the model chosen and to the power and exhaust unit models that will be assembled
 
Floor pit with masonry works The standard booth is supplied with masonry works basement, with excavation works (at customer’s charge) to be realized according to our drawings, with 15 grates dim. 920 x 1000 x 40 x 3 mm for floor pit dim. 2840 x 5030 mm, including metal dividing bars, under-grate trays with special flaps and paint-stop filter rolls
 
Metal basement The metal basement can be supplied as an option, in this case no excavation works are required. The raised metal basement has a height of 300 mm and is covered with 21 grates dim. 920 x 1000 x 40 x 3 mm and side checquered boards on the walking surface at the two sides of the grates. The basement comes with the metal dividing bars, under-grate trays with special flaps and paint-stop filter rolls. To allow the entrance of a car into the booth several options can be chosen: 2 external ramps 2000 x 500 mm, a fixed internal ramp 1730 mm one or a pneumatic one.
 
Front frame The frontal frame has a thickness of 80 mm and the shutters of 50 mm. It can be supplied with 2 doors with useful opening dimension of mm 2400 x 2570h, with 3 doors with useful opening dimension of mm 3000 x 2570h, or with 4 shutters with useful opening dimension of mm 3780 x 2570h. The doors are equipped with standard observation windows secured with rubber gaskets. The glasses are anti-breaking and laminated. The personnel service door can be supplied with springs locks or anti-panic crossbar handle. As an option all the front doors can be supplied of “deluxe” type with large observation windows of 2100x700mm and with metal frames matching the same colour of the spray booth trims
 
Side and rear walls Thickness 55 mm type "sandwich" made with white pre-painted iron sheets with mineral inside, with special interlocking system with no screws and no welding points
 
Filtering ceiling Manufactured with white pre-painted iron sheets with 3 rolls of ceiling filters 945 mm wide each one supported by white square horizontal bars. The total filtering surface changes according to the length of the booth itself
 
Plenum Single iron sheet uninsulated with useful height of 480 mm
 
Lighting system 10 or 12 light groups (according to the length of the booth) located on top corners oblique mounted at 45°. Each light group is equipped with 2 or 4 fl. tubes 30W controlled by 1 or 2 electronic ballasts and protected by safety laminated glass 6/7 mm and metal frame sealed with gasket. As an option one can choose additional lower light groups equipped with 2 or 4 fl. tubes 30W
 
Power unit





The power unit can have air capacities from 18.000 m3/h to 22.000 m3/h and consequently dimensions that go from 1500 x 1500 mm to 1600 x 1600 mm. each power unit is supplied with stainless steel heat exchanger AISI430 with indirect flame exchange with two levels of tube racks, equipped with 1 double intake scirocco belt-driven fan and electric motor with pulleys and belts. It is supplied with stainless steel chimney simple foil Ø 250 mm3 m. straight + T + cap. On the air intake duct is installed a special drawer with pocket pre-filters of easy maintenance. A suitable oil fired Riello burner is supplied with the standard model, but it can be supplied with a gas burner with its gas train on demand.

Air capacity: from 18.000 m3/h to 22.000 m3/h
Electric power : 5,5 KW or 7,5 KW
Thermal power : from 100.000 Kcal/h to 160.000 Kcal/h
Burner: oil or gas
 
Exhaust unit






The exhaust units can have air capacities from 20.000 m3/h to 24.000 m3/h and consequently dimensions that go from 1200 x 1200 mm to 1200 x 1600 mm. the exhaust units can have the following different configurations:

Series TV: Exhaust units with no filters (only blowing unit)
Series EM: Exhaust units with paint stop filters and “M” holders
Series ET: Exhaust units with pocket filters dim. 357 x 582 x 440h
Series EC: Exhaust units with sleeve filters dim. 260 x 260 x 1000h
Series EK: Exhaust units with special cartridge made up of sleeve filters dim. 260 x 260 x 1000h + active charcoal in cylinders
Air capacity: from 18.000 m3/h to 24.000 m3/h
Electric power: 5,5 KW or 7,5 KW

 
Control panel Electro-mechanic with cabinet IP55 with digital process controller for full automatic control of working cycles, main switch with key, hour counter, buttons, lamps, fuses etc. On demand, it can be supplied with Magnehelic pressure gauge, with pressure regulator and step-by-step motor during the spraying cycle
 
Various options Each spray booth can be equipped with other additional options as personnel side service door, parts hanging bar with rails, angle shelf etc.
 
Colours and trims Each Cometi spray booth is made of white pre-painted iron sheets and is refinished with plastic-coated corners. The spray booth can be trimmed in various colour chosen according to the end user taste or to the colour of the body shop where the spray booth will be installed. The available colours are red, yellow, dark blue, light blue, green, grey. The external units and the basement are zinced but, as an option, they can be trimmed in the same colour of the other booth trims.
EMPRESA
Equipo y Servicio MUPRO
Equipo para Taller en México
Quienes Somos
Equipo para Llanteras

SERVICIOS
Mantenimiento de Equipo Taller Automotriz
Mantenimiento de Equipo para Llanteras
Asesoría en Instalación de equipos de taller
Capacitación en equipo automotriz

DISTRIBUIDORES
Distribuidores de Ravagliogi
Quieres ser distribuidor de equipos de taller

CONTACTO
Ubicación de MUPRO
Solicitud de Información
Solicitud de Cotización
PRODUCTOS
Rampas para Auto y Camioneta
Rampas para Taller Automotriz
Alineadoras de dirección para auto
Alineadoras de ruedas
Equipo de Alineación y Balanceo
Balanceadoras de Llantas
Equilibradoras Electrónicas de Llantas
Balanceadoras de ruedas para Auto
Balanceadoras para Camión
Desmontadoras de ruedas para Auto
Desmontadoras de Neumáticos para Auto
Desmontadoras de Llantas para Motocicletas
Generador de Nitrógeno
Prensas Hidráulicas
Sistemas de Gases
Tornos para discos y tambores
Rectificadoras de discos y tambores
Aire Acondicionado
Sistema de Enfriamiento
Opresor de Resorte
Pintura
Compresoras de Aire
NOTICIAS
Nueva desmontadora para camiones, autobuses y agrícolas GRS 926

Copyright © Equipo y Servicio MUPRO, S.A. de C.V., 2010 / México, D.F.
Diseño Web / Web Hosting / Marketing Web por Anagram Media Graphics